100% Hassle Free Guarantee

How to Remove Mold from Your Home’s Exterior

Pressure Washing Home

How to Remove Mold from Your Home’s Exterior

Mold is a common problem in many homes and can cause serious damage if left untreated. Not only can it make your home look unsightly, but it can also lead to health issues such as allergies and asthma. To avoid these risks, it’s important to take quick action when you spot mold on the exterior of your home. Fortunately, removing mold from the outside of your house isn’t too difficult – all you need are the right tools and a bit of know-how.

Pressure Washing Vinyl Siding
Pressure Washing Vinyl Siding

In this article, we’ll provide step-by-step guidance on how to effectively remove mold from your home’s exterior and prevent its return in the future. So read on for everything you need to know about getting rid of that pesky mildew!

  1.  Make sure there is no water source that can contribute to mold growth. Check for broken pipes, clogged gutters, downspouts, or leaking skylights. If you find a problem like this, fix it immediately before attempting to remove the mold.
  2. Identify the type of surface where the mold is growing. Different surfaces, such as wood, stucco, or brick, require different approaches for removal.
  3. Choose the right cleaning solution for the surface. For example, a solution of bleach and water is best for removing mold from concrete and masonry walls. Mold on wood should be scrubbed with a bleach-water mixture and then rinsed with clean water.
  4. Protect yourself! Wear protective gloves and clothing when cleaning mold, as the spores can spread through the air and cause respiratory problems. Make sure there is adequate ventilation in the area to avoid breathing in any of the fumes from your cleaning solution.
  5. Scrub the affected area with the cleaning solution and a brush or sponge. Make sure to cover every inch of the surface, as mold spores can hide in crevices. Once you’ve scrubbed away all visible signs of mold, rinse with clean water.
  6. If the mold stubbornly remains, you may need to repeat steps 3 through 5 until it is completely gone.
  7. Once you’ve successfully removed the mold, take steps to prevent it from returning. Make sure there is proper ventilation in the area, as well as adequate drainage so that water does not accumulate on surfaces and provides a breeding ground for mold growth. Regularly inspect your home’s exterior for signs of new mold growth and take action if necessary.

The key to preventing the return of mold is to keep the area dry. Make sure that there are no sources of leaks, such as broken pipes or clogged gutters and downspouts, which can lead to moisture accumulation on surfaces. Additionally, check for any cracks in exterior walls or foundations that could allow water inside your home. 

It is also important to keep the area well-ventilated. This will reduce humidity levels, making it less favorable for mold growth. Make sure that your windows and doors are properly sealed to avoid drafts, which can cause moisture buildup.

By following these steps, you should be able to effectively remove mold from your home’s exterior and prevent its return. Keep in mind that quick action is essential for preventing mold from spreading, as well as potential risks to your health. So if you spot any signs of mold growth, make sure to take immediate action!

Pressure Washing Siding
Pressure Washing Siding

Sunco Exterior Solutions
68 W Morningside Dr, Bluffton, SC 29910
(843) 755-6721